ICELED

Micke8146 · 1 Colour User

If you, by misstake, should press down and hold the "Magic"-key on the remote control, you could re-program your remote control which is NOT fun!

So, if your IceLed-UFO should stop "listening" to your remote control, here's what you should do:

1. Press and hold the "Magic"-button until you see the power button blink, first one time - pause - then two times.

2. Press the minus "-"-button three times.

3. Press the minus button, and then the power button

4. Repeat step three (up to 150 times) until the IceLed-UFO reacts to the power button. Then press the "Magic"-button once.

5. Now you're up and running again!

Thanks!

Mikael Eriksson
FX ON WHEELS.com
Sweden

**Adrian** · Site Admin

Thanks Mikael - but there is a much easier way. The procedure you've given makes the remote search through all the codes. Instead, you can enter the correct code directly. Here is the best way to do it...

Micke8146 · 1 Colour User

Yes, you're right!

That is a better way.

I did'nt know the codes, and that is why I posted the help posted earlier.

Would it be possible to let the user/customer know of this problem in the user manual? It would make it easier for the customer, as well as for resellers.

Regards,
Mikael Eriksson
FX ON WHEELS.com

**Adrian** · Site Admin

Yes, sorry - it's only been a problem once or twice - but that's enough already! The sheet above is to go in the next release of the user guide.

Micke8146 · 1 Colour User

That sounds great!

There is also another reason to why reprogramming the remote control your way is better. When using the search method, the IceLed-UFO seems to react to more than one program. The only thing is that the other programs only work with some functions.

Am I right?

Regards,
Mikael Eriksson
FX ON WHEELS.com
Sweden

**Adrian** · Site Admin

Yes, the 'code scan' feature goes through some similar, but not identical variations.
See this topic for a discussion on using a Casio Wristwatch to control UFO Twisted Evil

winger · 4 Colour User

I'm currently having some problems with a remote that I have lying around here. The "shortcut" reprogramming as per manual doesn't seem to work. Confused

Might give the elaborate way a go. Rolling Eyes

_________________
Duct Tape is like the Force....It has a Light Side and a Dark Side.....and it binds the Universe Together......

IceledOz · 1 Colour User

Just what i was after i am using a Marantz programable remote does anyone have the coding for the remote?
_________________
www.iceled.com.au <---- Australia and New Zealand Distributor of IceLED

winger · 4 Colour User

winger · 4 Colour User

**Adrian** · Site Admin

winger, can you test the remote by setting it to a TV you own?

IceledOz, what model number is your Marantz? If you set it to operate Philips TV's it should work!

winger · 4 Colour User

Tried it on my tv (it's a Philips), nothing happens. Took the batteries out for a while, put 'em back in, set the code again as per manual, still nothing.

Í did notice that, when UFO is activated through the door connection (program 0), pressing the power button on the remote makes UFO's display blink. It doesn't switch on/off though. (But something IS being sent/transmitted/received.)

Took out my trusty old remote next for a test. UFO is responding to it exactly as expected.

Hmmm... Switching my remote with a friend, trying to help him out wasn't too bright of an idea (pun intended). Wink

He just installed his ZEN for the first time, only to find out his remote didn't work. (I figured it was somehow reprogrammed. Should have been an easy fix.)
_________________
Duct Tape is like the Force....It has a Light Side and a Dark Side.....and it binds the Universe Together......

Spawn · 1 Colour User

Right, I just recieved the remote display, minus remote. I used a standard universal remote to test it out, and it worked well. Now I am trying to make use of one of my old Palm PDA's to set it up as the remote. Problem is that the codebase supplied for the Philips TV doesn't do anything. I'm able to enter the commands in as Hex codes, so my question is, is there any way to get the hex codes for the commands?

I'm using Novii Remote Deluxe for Palm and once I get the code done and working, I'll post it for anyone else who wants to do the same thhing.

***Edit

I've found the manual and model number for the remote that used to be sold on Oznium as the replacement if anyone is looking for it.
http://www.oneforall-int.com/download/manual/MANUAL_URC6010_English.pdf